Ethic HIT & VPA Footer Combo
I worked with both Ethics and VPA to bring a durable component setup for .204/5mm shafts. This combo includes one dozen HIT inserts and VPA collars/footers.
Adjustable 5mm/.204 Internal Insert (Comparable to Easton HIT™ Insert)
The 50 grain aluminum HIT embeds the front 3” of your carbon shaft with metal. The large glue surface of the long HIT prevents any movement of the hidden insert further into the shaft. The black anodized aluminum VPA collar prevents blow out and adds a ton of strength for minimal weight.
The AL Insert is adjustable from 25-50 gn; the SS is adjustable from 75-150 gn.
The standard 5mm/.204 internal insert is just like it sounds, installed the same way you would any insert using a HIT Installation Tool or glued in as a system. *Installation Tool is not included.
Threads are 8/32.
VPA Collar/Footers
Weight: 10gr.
Length: 3/4
The 10-12 grain VPA footer is more tapered at the rear and a tighter fit - which allows for much easier removal from bag targets than the Ethics options. I prefer to install with a archery hot melt which allows these to be reused if you break or damage a shaft. Saving you money in the long run.
I worked with both Ethics and VPA to bring a durable component setup for .204/5mm shafts. This combo includes one dozen HIT inserts and VPA collars/footers.
Adjustable 5mm/.204 Internal Insert (Comparable to Easton HIT™ Insert)
The 50 grain aluminum HIT embeds the front 3” of your carbon shaft with metal. The large glue surface of the long HIT prevents any movement of the hidden insert further into the shaft. The black anodized aluminum VPA collar prevents blow out and adds a ton of strength for minimal weight.
The AL Insert is adjustable from 25-50 gn; the SS is adjustable from 75-150 gn.
The standard 5mm/.204 internal insert is just like it sounds, installed the same way you would any insert using a HIT Installation Tool or glued in as a system. *Installation Tool is not included.
Threads are 8/32.
VPA Collar/Footers
Weight: 10gr.
Length: 3/4
The 10-12 grain VPA footer is more tapered at the rear and a tighter fit - which allows for much easier removal from bag targets than the Ethics options. I prefer to install with a archery hot melt which allows these to be reused if you break or damage a shaft. Saving you money in the long run.
I worked with both Ethics and VPA to bring a durable component setup for .204/5mm shafts. This combo includes one dozen HIT inserts and VPA collars/footers.
Adjustable 5mm/.204 Internal Insert (Comparable to Easton HIT™ Insert)
The 50 grain aluminum HIT embeds the front 3” of your carbon shaft with metal. The large glue surface of the long HIT prevents any movement of the hidden insert further into the shaft. The black anodized aluminum VPA collar prevents blow out and adds a ton of strength for minimal weight.
The AL Insert is adjustable from 25-50 gn; the SS is adjustable from 75-150 gn.
The standard 5mm/.204 internal insert is just like it sounds, installed the same way you would any insert using a HIT Installation Tool or glued in as a system. *Installation Tool is not included.
Threads are 8/32.
VPA Collar/Footers
Weight: 10gr.
Length: 3/4
The 10-12 grain VPA footer is more tapered at the rear and a tighter fit - which allows for much easier removal from bag targets than the Ethics options. I prefer to install with a archery hot melt which allows these to be reused if you break or damage a shaft. Saving you money in the long run.